Description

Bond Arms Backup Original .45 Auto (.45 ACP) 2.5-Inch Black Stainless

The Bond Arms Backup Original .45 Auto is a compact double-barrel break-action handgun chambered in .45 Auto (.45 ACP). This configuration features a textured, anti-glare stainless-steel double barrel and frame, black rubber grips, and a 2.5-inch barrel. The supplied specifications list a two-round capacity and a weight of 18.5 ounces.

The Backup incorporates several mechanical features, including an automatic spent-casing extractor, patented rebounding hammer, retracting firing pins, cross-bolt safety, and a spring-loaded, cammed locking lever. The supplied information also identifies the frame size as Subcompact and states compatibility with Bond Arms barrels.

Bond Arms Backup Key Features

• .45 Auto (.45 ACP) Chambering: Chambered for .45 Auto according to the supplied specifications.
• 2.5-Inch Barrel: Features a 2.5-inch barrel.
• Double-Barrel Configuration: Uses two barrels with a listed capacity of two rounds.
• Break-Action Design: Uses a break-action operating system.
• Textured Black Stainless Finish: The supplied specifications identify a black textured and bead-blasted stainless finish.
• Stainless-Steel Barrel and Frame: Both the double barrel and frame are specified as stainless steel.
• Black Rubber Grips: Equipped with black rubber grips.
• Automatic Spent-Casing Extractor: Includes an automatic spent-casing extractor.
• Rebounding Hammer: Features a patented rebounding hammer.
• Retracting Firing Pins: The supplied product information identifies retracting firing pins.
• Cross-Bolt Safety: Includes a cross-bolt safety.
• Spring-Loaded Cammed Locking Lever: Uses a spring-loaded, cammed locking lever as part of the action.
• Subcompact Frame: The supplied specifications identify the frame size as subcompact.
• Interchangeable Barrel Compatibility: The supplied information states compatibility with Bond Arms barrels.

Bond Arms Backup Specifications

Specification	Details
Action	Break Action
Capacity	2 Rounds
Barrel Length	2.5 Inches
Finish	Black Textured & Bead-Blasted Stainless
Grips	Black Rubber
Sights	Blade Front / Fixed Rear
Weight	18.5 oz
Cartridge	.45 Auto (.45 ACP)
Frame Size	Subcompact
Gun Model	BACKUP
State Compliance	Colorado Compliant / New York Compliant / Washington Compliant
Type	Centerfire

.45 Auto (.45 ACP) Chambering

The Bond Arms Backup Original .45 Auto is specified for .45 Auto (.45 ACP). The supplied specifications classify the firearm as a centerfire model with a two-round capacity.

Users should verify the caliber markings on the individual firearm and consult the manufacturer’s documentation before selecting ammunition. Only ammunition approved for the specific firearm and chambering should be used.

2.5-Inch Double-Barrel Configuration

The Bond Arms Backup Original .45 Auto features a 2.5-inch double-barrel assembly. Its supplied capacity is two rounds, corresponding to the two-barrel configuration.

The model is identified as having a subcompact frame size. Exact dimensions, tolerances, and operating procedures should be confirmed using the manufacturer’s documentation for the individual firearm.

Black Textured and Bead-Blasted Stainless Finish

The supplied specifications identify the finish as Black Textured & Bead-Blasted Stainless. The product description further describes the stainless-steel barrel and frame as textured and anti-glare.

This finish specification applies to the supplied configuration. As with any firearm, appropriate cleaning, inspection, and storage procedures should be followed according to the manufacturer’s recommendations.

Black Rubber Grips

The Backup is equipped with black rubber grips. The supplied specifications identify the grip material as black rubber, complementing the black finish of the firearm.

Break-Action Mechanism

The Bond Arms Backup Original .45 Auto  uses a break-action operating system. The double-barrel assembly opens through its hinge mechanism, providing access to the chambers. The supplied product information identifies a spring-loaded, cammed locking lever as part of the locking system.

Users should follow the manufacturer’s instructions for opening, loading, unloading, inspection, and maintenance. Keep the muzzle pointed in a safe direction whenever manipulating the action.

Extractor, Hammer, and Firing Pins

The supplied product information identifies an automatic spent-casing extractor, patented rebounding hammer, and retracting firing pins.

These components are part of the firearm’s mechanical design. They should not be treated as substitutes for safe firearm handling. Consult the manufacturer’s documentation for complete operating and maintenance instructions.

Cross-Bolt Safety and Sights

The Backup includes a cross-bolt safety. The supplied specifications also list a blade front sight and fixed rear sight.

Users should become familiar with the safety and sight arrangement while following the manufacturer’s operating instructions and established firearm safety practices.

Interchangeable Barrel Compatibility

The supplied product information states that the Backup is compatible with Bond Arms barrels. Before installing any alternate barrel, compatibility should be confirmed with the manufacturer for the specific firearm and component.

Barrel changes and other configuration changes should be performed according to manufacturer-approved procedures. Do not modify the firearm or install components that are not specifically approved.

Safety and Responsible Handling

• Always treat every firearm as though it is loaded.
• Keep the muzzle pointed in a safe direction.
• Keep your finger outside the trigger guard until ready to fire in a lawful and appropriate setting.
• Use only ammunition that exactly matches the firearm’s markings and approved specifications.
• Inspect the firearm and ammunition before use.
• Follow the manufacturer’s instructions for loading, unloading, cleaning, and maintenance.
• Store the firearm securely and prevent unauthorized access.
• Use appropriate eye and hearing protection when shooting.
• Do not modify critical firearm components or safety mechanisms.
• Use only manufacturer-approved interchangeable barrels and components.

State Compliance Information

The supplied specifications identify this configuration as Colorado Compliant, New York Compliant, and Washington Compliant. Firearm regulations can vary based on jurisdiction, exact firearm configuration, and changes in applicable laws.

This information is based on the supplied product specifications and is not legal advice. Before acquiring, possessing, transporting, or using a firearm, verify the current requirements applicable to your location and circumstances.

Frequently Asked Questions

What caliber is the Bond Arms Backup?

This configuration is specified for .45 Auto (.45 ACP).

How many rounds does the Backup hold?

The listed capacity is 2 rounds.

What type of action does the Backup use?

The Bond Arms Backup uses a break-action operating system.

What is the barrel length?

The supplied specification lists a 2.5-inch barrel.

What is the frame size?

The supplied specifications identify the frame size as Subcompact.

How much does the Backup weigh?

The supplied specifications list the weight as 18.5 ounces.

What type of grips does the Backup have?

The firearm is specified with black rubber grips.

What sights are included?

The specifications list a blade front sight and fixed rear sight.

Does this Backup support interchangeable barrels?

The supplied product information states that the model is compatible with Bond Arms barrels. Compatibility should be confirmed with the manufacturer before installing any alternate barrel.

Bond Arms Backup Summary

The Bond Arms Backup Original .45 ACP is a compact two-round, double-barrel break-action handgun featuring a 2.5-inch barrel and subcompact frame. The supplied specifications identify a black textured and bead-blasted stainless finish, black rubber grips, and a listed weight of 18.5 ounces.

The model incorporates an automatic spent-casing extractor, patented rebounding hammer, retracting firing pins, cross-bolt safety, and spring-loaded cammed locking lever. The supplied information also identifies compatibility with Bond Arms barrels. For complete operating procedures, ammunition requirements, maintenance instructions, and safety information, consult the manufacturer’s documentation and the markings on the individual firearm. All firearm possession, transportation, and use should comply with applicable federal, state, and local laws.