Description

Bond Arms Century 2000 .45 Long Colt 3.5-Inch Stainless Steel

The Bond Arms Century 2000 is a compact break-action firearm featuring a stainless steel double-barrel and frame, a 3.5-inch barrel, and rosewood grips. The supplied specifications identify the model as chambered for .45 Long Colt, with a two-round capacity and a 5.5-inch overall length.

The Century 2000 incorporates several Bond Arms mechanical features, including an automatic spent casing extractor, patented rebounding hammer, retracting firing pins, cross-bolt safety, and spring-loaded cammed locking lever. The product description also states that the platform is compatible with Bond Arms barrels and can accommodate .410 shotshells when used with an appropriate compatible barrel configuration.

Bond Arms Century 2000 Key Features

• Cartridge: .45 Long Colt
• Action: Break Action
• Capacity: 2 Rounds
• Barrel Length: 3.5 Inches
• Finish: Stainless Steel
• Frame: Stainless Steel Double-Barrel Frame
• Grips: Rosewood
• Sights: Blade Front / Fixed Rear
• Automatic Spent Casing Extractor: Yes
• Hammer: Patented Rebounding Hammer
• Firing Pins: Retracting
• Safety: Cross-Bolt Safety
• Locking System: Spring-Loaded, Cammed Locking Lever
• Overall Length: 5.5 Inches
• Weight: 21 Ounces
• Type: Centerfire

Technical Specifications

Specification	Details
Model	Bond Arms Century 2000
Action	Break Action
Capacity	2 Rounds
Cartridge	.45 Long Colt
Barrel Length	3.5 Inches
Finish	Stainless Steel
Frame	Stainless Steel Double-Barrel
Grips	Rosewood
Sights	Blade Front / Fixed Rear
Weight	21 Ounces
Overall Length	5.5 Inches
Gun Model	CENTURY 2000
Type	Centerfire
State Compliance Listed	Colorado, New York, Washington

3.5-Inch Barrel and .45 Long Colt Chambering

The Century 2000 is specified with a 3.5-inch barrel chambered for .45 Long Colt. The .45 Long Colt designation should always be matched to the firearm’s actual chamber markings and the manufacturer’s ammunition specifications before use.

The supplied product description also references the ability to use up to 3-inch .410 shotshells. Because the technical specification table identifies the listed cartridge as .45 Long Colt, any .410 Gauge capability should be confirmed for the specific barrel and configuration before use. Ammunition compatibility should always be determined from the manufacturer’s documentation and firearm markings.

Stainless Steel Double-Barrel Construction

The Century 2000 uses a stainless steel double-barrel and frame. The stainless construction is paired with a 3.5-inch barrel and rosewood grips, creating the configuration identified in the supplied product specifications.

The product information also states that the Century 2000 is compatible with Bond Arms barrels. Barrel compatibility should be confirmed for the specific firearm and replacement barrel before installation or use.

Rosewood Grips

The Century 2000 is fitted with rosewood grips. The wood grip material provides a traditional appearance that contrasts with the stainless steel finish of the frame and barrel assembly.

Blade Front and Fixed Rear Sights

The supplied specifications identify the Century 2000 with a blade front sight and fixed rear sight. This fixed sight configuration is part of the factory specifications provided for the model.

Mechanical Features

Automatic Spent Casing Extractor

The Century 2000 is specified with an automatic spent casing extractor. The extractor is designed as part of the firearm’s break-action operating system.

Patented Rebounding Hammer

A patented rebounding hammer is listed among the Century 2000’s factory features. Users should consult the manufacturer’s documentation for detailed information concerning hammer operation and safe handling.

Retracting Firing Pins

The supplied description identifies retracting firing pins as a feature of the Century 2000. This feature should be understood in conjunction with the manufacturer’s complete operating and safety instructions.

Cross-Bolt Safety

The Century 2000 incorporates a cross-bolt safety. Users should become familiar with the safety mechanism and verify its condition as part of safe handling procedures.

Spring-Loaded Cammed Locking Lever

The break-action design incorporates a spring-loaded, cammed locking lever. The locking mechanism should be operated according to the manufacturer’s instructions.

Two-Round Capacity

The supplied specifications list the Century 2000 with a two-round capacity. Its break-action configuration is designed around two barrels, with the exact ammunition configuration dependent on the applicable barrel and chamber specifications.

Size and Weight

The Century 2000 has a listed 5.5-inch overall length, a 3.5-inch barrel, and a listed weight of 21 ounces. These dimensions are taken directly from the supplied specification table.

Safety and Responsible Handling

• Always treat the firearm as loaded until you have personally verified that it is unloaded.
• Keep the muzzle pointed in a safe direction whenever the firearm is handled.
• Keep your finger outside the trigger area until you are intentionally operating the firearm according to the manufacturer’s instructions.
• Use only ammunition specifically identified as compatible with the firearm and installed barrel.
• Verify chamber markings before loading any ammunition.
• Read and follow the manufacturer’s owner’s manual before operating the firearm.
• Inspect the firearm and barrel configuration before use.
• Keep the firearm unloaded and securely stored when it is not being used.
• Store firearms and ammunition securely and separately where required by law.
• Follow all applicable federal, state, and local firearm regulations.

State Compliance Information

The supplied specification table lists the Century 2000 as Colorado Compliant, New York Compliant, and Washington Compliant. Firearm regulations can change and may vary according to jurisdiction, configuration, transfer circumstances, and local requirements.

The compliance information above reflects the supplied product data and should not be treated as a substitute for current legal requirements. Always verify applicable laws and regulations with the appropriate authorities or a properly licensed firearms dealer before transferring or taking possession of a firearm.

Frequently Asked Questions

What caliber is the Bond Arms Century 2000?

The technical specifications identify the Century 2000 as chambered for .45 Long Colt.

What is the barrel length?

The Century 2000 has a listed 3.5-inch barrel.

How many rounds does the Century 2000 hold?

The supplied specifications list a 2-round capacity.

What type of action does the Century 2000 use?

The Century 2000 is specified as a break-action firearm.

What type of grips does the Century 2000 have?

The specification table lists rosewood grips.

Does the Century 2000 have a safety?

Yes. The supplied product information lists a cross-bolt safety.

What sights are included?

The Century 2000 is specified with a blade front sight and fixed rear sight.

What is the overall length?

The listed overall length is 5.5 inches.

How much does the Century 2000 weigh?

The supplied specification table lists the weight as 21 ounces.

Bond Arms Century 2000 Summary

The Bond Arms Century 2000 is a compact break-action model specified with a 3.5-inch stainless steel barrel, stainless steel double-barrel frame, rosewood grips, fixed sights, and a two-round capacity. Its listed chambering is .45 Long Colt, while the supplied product description additionally references compatibility with up to 3-inch .410 shotshells when using an appropriate configuration.

The model includes an automatic spent casing extractor, patented rebounding hammer, retracting firing pins, cross-bolt safety, and spring-loaded cammed locking lever. The supplied specifications list an overall length of 5.5 inches and a weight of 21 ounces.

Compatibility note: The technical table lists .45 Long Colt as the cartridge, while the descriptive text references .410 shotshell capability. Any .410 Gauge use should be confirmed for the specific barrel and firearm configuration using current manufacturer documentation before publication or use.