Description

Bond Arms DT47 .45 Long Colt/.410 Gauge 4.25-Inch Stainless with Gold Engraving(Trump Gun)

The Bond Arms DT47 is a limited-edition double-barrel pistol featuring a stainless steel construction, elaborate gold engraving, and a 4.25-inch flat-sided barrel chambered for .45 Long Colt and .410 Gauge. The DT47 combines Bond Arms’ compact double-barrel format with a distinctive engraved presentation intended to commemorate the 45th and 47th Commander in Chief.

Built around a stainless steel double-barrel frame, the DT47 incorporates several Bond Arms design features, including a spring-loaded locking lever, cross-bolt safety, retracting firing pin, and patented rebounding hammer. The pistol uses B6 resin grips and fixed sights, with an overall length of 6.25 inches according to the supplied specifications.

Bond Arms DT47 Key Features

• Caliber: .45 Long Colt / .410 Gauge
• Action: Pistol
• Capacity: 2 rounds
• Barrel Length: 4.25 inches
• Barrel Style: Flat-sided barrel
• Finish: Stainless steel with gold engraving
• Frame: Stainless steel double-barrel frame
• Grips: B6 resin
• Sights: Fixed
• Safety: Cross-bolt safety
• Locking System: Spring-loaded locking lever
• Hammer: Patented rebounding hammer
• Firing System: Retracting firing pin
• Overall Length: 6.25 inches
• Made in the USA: Yes

Technical Specifications

Specification	Details
Model	Bond Arms DT47
Action	Pistol
Capacity	2 Rounds
Cartridge	.45 Long Colt / .410 Gauge
Barrel Length	4.25 Inches
Barrel Type	Flat-Sided
Finish	Stainless Steel with Gold Engraving
Frame	Stainless Steel Double-Barrel Frame
Grips	B6 Resin
Sights	Fixed
Safety	Cross-Bolt Safety
Locking Lever	Spring-Loaded Locking Lever
Hammer	Patented Rebounding Hammer
Firing Pin	Retracting Firing Pin
Overall Length	6.25 Inches
Weight	25.6 lbs (verify with manufacturer)
Type	Centerfire
State Compliance Listed	Colorado, New York, Washington
Made in the USA	Yes

4.25-Inch Flat-Sided Barrel

The DT47 is equipped with a 4.25-inch flat-sided barrel. The barrel is chambered for .45 Long Colt and .410 Gauge according to the supplied specifications. Its flat-sided profile is a distinctive design element of the DT47 and complements the engraved stainless steel finish.

.45 Long Colt and .410 Gauge Chambering

The DT47 is specified for two ammunition types: .45 Long Colt and .410 Gauge. These chambering specifications should always be confirmed against the markings on the individual firearm and the manufacturer’s documentation before selecting or using ammunition.

Only ammunition specifically appropriate for the firearm and its chamber markings should be used. Users should follow the manufacturer’s instructions regarding ammunition compatibility, loading, unloading, inspection, cleaning, and storage.

Stainless Steel Construction with Gold Engraving

The DT47 uses a stainless steel double-barrel and frame with a distinctive stainless finish and gold engraving. The supplied description specifies elaborate engraving on both sides of the 4.25-inch flat-sided barrel.

The engraved finish gives this limited-edition model a presentation-oriented appearance while retaining the stainless steel construction specified for the DT47.

B6 Resin Grips

The DT47 is fitted with B6 resin grips. The grips provide the specified interface between the frame and the shooter’s hands while complementing the engraved stainless steel appearance of the pistol.

Safety and Mechanical Features

Cross-Bolt Safety

The DT47 incorporates a cross-bolt safety. Users should become familiar with the operation of the safety and verify its condition before handling the firearm.

Spring-Loaded Locking Lever

A spring-loaded locking lever is included as part of the DT47’s specified mechanical design. The locking system should be operated according to the manufacturer’s instructions.

Patented Rebounding Hammer

The supplied specifications identify a patented rebounding hammer as one of the DT47’s mechanical features. Users should consult the manufacturer’s documentation for complete information about hammer operation and safe handling.

Retracting Firing Pin

The DT47 also incorporates a retracting firing pin. This is listed as a factory feature of the model and should be understood in conjunction with the manufacturer’s complete safety and operating instructions.

Two-Round Capacity

The supplied specifications list the Bond Arms DT47 with a 2-round capacity. Because this is a compact double-barrel configuration, ammunition capacity is limited to two rounds.

Safety and Responsible Handling

• Always treat the firearm as loaded until you have personally verified otherwise.
• Keep the muzzle pointed in a safe direction while handling the firearm.
• Keep your finger outside the trigger area until you are prepared to fire.
• Use only ammunition that matches the firearm’s chamber markings and manufacturer specifications.
• Read and follow the manufacturer’s owner’s manual before operating the firearm.
• Keep the firearm unloaded and secured when it is not being used.
• Store ammunition separately and securely where required by applicable law.
• Follow all applicable federal, state, and local firearm laws.

State Compliance Information

The supplied product specifications list the DT47 as compliant with Colorado, New York, and Washington requirements. Firearm laws and regulations can change, and compliance may depend on the specific configuration, jurisdiction, transfer requirements, and applicable local restrictions.

Always verify the current requirements applicable to your location with the appropriate state or local authority and, where applicable, a properly licensed firearms dealer before transferring or taking possession of the firearm.

Frequently Asked Questions

What caliber is the Bond Arms DT47?

The supplied specifications identify the DT47 as chambered for .45 Long Colt and .410 Gauge.

What is the barrel length of the DT47?

The DT47 has a specified 4.25-inch flat-sided barrel.

How many rounds does the DT47 hold?

The supplied specifications list a 2-round capacity.

What type of grips does the DT47 use?

The DT47 is specified with B6 resin grips.

Does the DT47 have a safety?

Yes. The supplied specifications list a cross-bolt safety.

What finish does the DT47 have?

The supplied specifications identify the finish as stainless steel with gold engraving, with elaborate engraving specified on both sides of the barrel.

Where is the Bond Arms DT47 made?

The supplied specifications identify the DT47 as Made in the USA.

What is the listed weight of the DT47?

The supplied specification table lists the weight as 25.6 lbs. Because this figure is unusually high relative to the listed 6.25-inch overall length and compact configuration, it should be verified against the manufacturer’s current specifications before publication as a confirmed technical specification.

Bond Arms DT47 Summary

The Bond Arms DT47 is a limited-edition double-barrel pistol specified with a 4.25-inch flat-sided barrel, .45 Long Colt/.410 Gauge chambering, stainless steel construction, and elaborate gold engraving. It features B6 resin grips, fixed sights, a cross-bolt safety, spring-loaded locking lever, retracting firing pin, and patented rebounding hammer.

With a listed two-round capacity, 6.25-inch overall length, and centerfire configuration, the DT47 combines a compact double-barrel format with a distinctive engraved presentation. The supplied specifications identify it as made in the USA and list Colorado, New York, and Washington compliance.

Specification note: The supplied weight of 25.6 lbs should be independently verified before being treated as a final published specification.