Description

Bond Arms Old Glory .38 Special/.357 Magnum 3.5-Inch American Flag Stainless Steel Cerakote

The Bond Arms Old Glory .38 Special is a limited-edition American Flag-themed double-barrel firearm featuring an American Flag Cerakote finish, laser-engraved detailing, extended black ash grips, and a stainless steel double-barrel frame. The supplied specifications identify the model as the OLD GLORY, with a 3.5-inch barrel, two-round capacity, fixed sights, and a 5.5-inch overall length.

The Old Glory incorporates several Bond Arms mechanical features, including an automatic spent casing extractor, patented rebounding hammer, retracting firing pin, cross-bolt safety, and spring-loaded cammed locking lever. The supplied Package 2 description additionally identifies a second Cerakoted barrel chambered in .357 Magnum/.38 Special and a Bond Arms black leather driving holster.

Bond Arms Old Glory Key Features

• Model: OLD GLORY
• Action: Break Action
• Capacity: 2 Rounds
• Barrel Length: 3.5 Inches
• Finish: American Flag Stainless Steel Cerakote
• Grips: Black Ash with American Flag Engraving
• Sights: Blade Front / Fixed Rear
• Frame: Stainless Steel Double-Barrel Frame
• Automatic Spent Casing Extractor: Yes
• Hammer: Patented Rebounding Hammer
• Firing Pin: Retracting
• Safety: Cross-Bolt Safety
• Locking System: Spring-Loaded, Cammed Locking Lever
• Overall Length: 5.5 Inches
• Weight: 22 Ounces
• Hand: Right
• Type: Centerfire

Technical Specifications

Specification	Details
Model	Bond Arms Old Glory
Gun Model	OLD GLORY
Action	Break Action
Capacity	2 Rounds
Barrel Length	3.5 Inches
Finish	American Flag Stainless Steel Cerakote
Frame	Stainless Steel Double-Barrel
Grips	Black Ash American Flag
Sights	Blade Front / Fixed Rear
Weight	22 Ounces
Hand	Right
Overall Length	5.5 Inches
Type	Centerfire
State Compliance Listed	Colorado, New York, Washington

American Flag Cerakote Finish

The Bond Arms Old Glory .38 Special features an American Flag stainless steel Cerakote finish with laser-engraved American Flag detailing across the barrel and frame. The supplied description also specifies custom American Flag engraving on the extended black ash grips.

This combination gives the model a distinctive commemorative appearance while retaining the stainless steel double-barrel and frame specified for the firearm.

3.5-Inch Barrel Configuration

The Old Glory is specified with a 3.5-inch barrel. The supplied product information states that the firearm is compatible with standard Bond Arms barrels, allowing the platform to accommodate compatible barrel configurations according to manufacturer specifications.

Any replacement or additional barrel should be confirmed as compatible with the specific firearm before installation. Chamber markings and manufacturer documentation should always be consulted before selecting ammunition.

Barrel and Cartridge Specification Notice

The supplied information contains a chambering discrepancy that should be resolved before this product page is published as a definitive technical description.

• The product title identifies .38 Special/.357 Magnum.
• The main product description states .45 Long Colt/.410 Gauge.
• The description of Old Glory Package 2 specifically identifies a second Cerakoted barrel in .357 Magnum/.38 Special.
• The supplied specification table does not include a cartridge field.

Because the supplied information does not establish which chambering belongs to the primary barrel, the exact configuration should be verified using the firearm markings and current manufacturer documentation before publishing a definitive cartridge specification or using ammunition.

Black Ash American Flag Grips

The Bond Arms Old Glory .38 Special  is equipped with extended black ash grips featuring American Flag customization. The grips complement the American Flag Cerakote treatment on the barrel and frame.

Blade Front and Fixed Rear Sights

The supplied specifications list a blade front sight and fixed rear sight. This sight configuration is part of the listed factory specification for the Old Glory.

Mechanical Features

Automatic Spent Casing Extractor

The Old Glory incorporates an automatic spent casing extractor according to the supplied product information. The extractor forms part of the firearm’s specified break-action system.

Patented Rebounding Hammer

A patented rebounding hammer is listed among the Old Glory’s mechanical features. Detailed operating procedures should be followed according to the manufacturer’s owner’s manual.

Retracting Firing Pin

The product description specifies a retracting firing pin. Users should consult the manufacturer’s documentation for complete information concerning the firing system and safe operation.

Cross-Bolt Safety

The Old Glory includes a cross-bolt safety. Users should familiarize themselves with the operation of the safety and follow all manufacturer instructions.

Spring-Loaded Cammed Locking Lever

The firearm uses a spring-loaded, cammed locking lever as part of its specified break-action design. The mechanism should be operated only according to the manufacturer’s instructions.

Old Glory Package 2

The supplied product description identifies Old Glory Package 2 as including a second Cerakoted barrel chambered in .357 Magnum/.38 Special, along with a Bond Arms black leather driving holster.

Because the supplied information does not clearly identify the chambering of the primary 3.5-inch barrel, the additional .357 Magnum/.38 Special barrel should be treated as a separate configuration until the manufacturer documentation confirms the complete package specifications.

Two-Round Capacity

The Old Glory is specified with a two-round capacity. The supplied action designation is break action, with the firearm configured around its double-barrel design.

Size and Weight

The specification table lists the Old Glory at 5.5 inches overall length and 22 ounces in weight. The listed barrel length is 3.5 inches.

Safety and Responsible Handling

• Always treat the firearm as loaded until you have personally verified that it is unloaded.
• Keep the muzzle pointed in a safe direction whenever the firearm is handled.
• Keep your finger outside the trigger area until you are intentionally operating the firearm according to the manufacturer’s instructions.
• Use only ammunition that exactly matches the chamber markings and manufacturer specifications.
• Verify the chambering of any installed barrel before loading ammunition.
• Read and follow the manufacturer’s owner’s manual before operating or maintaining the firearm.
• Become familiar with the cross-bolt safety and other controls before handling the firearm.
• Use only manufacturer-approved or confirmed-compatible barrels and components.
• Keep the firearm unloaded and securely stored when it is not being used.
• Store firearms and ammunition securely and separately where required by applicable law.
• Follow all applicable federal, state, and local firearm laws and regulations.

State Compliance Information

The supplied specification table lists the Old Glory as Colorado Compliant, New York Compliant, and Washington Compliant. Firearm laws and regulations can change and may depend on the specific configuration, jurisdiction, transfer circumstances, and local requirements.

The compliance information supplied for this product should therefore be independently verified against current applicable laws before any transfer or possession. Consult the appropriate state or local authority or a properly licensed firearms dealer for jurisdiction-specific requirements.

Frequently Asked Questions

What is the Bond Arms Old Glory?

The Old Glory is a Bond Arms double-barrel break-action model featuring an American Flag Cerakote finish, engraved black ash grips, a 3.5-inch barrel, and a two-round capacity.

What is the barrel length?

The supplied specifications list a 3.5-inch barrel.

How many rounds does the Old Glory hold?

The supplied specification table lists a 2-round capacity.

What finish does the Old Glory have?

The listed finish is American Flag Stainless Steel Cerakote, with American Flag engraving across the barrel and frame.

What grips does the Old Glory use?

The supplied specifications identify black ash American Flag grips, described as extended black ash grips with custom American Flag engraving.

Does the Old Glory have a safety?

Yes. The supplied product information lists a cross-bolt safety.

What sights are used?

The Old Glory is specified with a blade front sight and fixed rear sight.

What is included with Old Glory Package 2?

The supplied description states that Package 2 includes a second Cerakoted .357 Magnum/.38 Special barrel and a Bond Arms black leather driving holster.

What is the exact chambering of the primary Old Glory barrel?

The supplied information is inconsistent. The title identifies .38 Special/.357 Magnum, while the main description states .45 Long Colt/.410 Gauge. The specification table does not list a cartridge. The exact primary barrel chambering should therefore be verified against the firearm markings and current manufacturer documentation.

Bond Arms Old Glory Summary

The Bond Arms Old Glory is a commemorative double-barrel break-action model with a 3.5-inch barrel, American Flag stainless steel Cerakote finish, engraved black ash grips, fixed sights, and a two-round capacity. The listed overall length is 5.5 inches and the listed weight is 22 ounces.

Its specified mechanical features include an automatic spent casing extractor, patented rebounding hammer, retracting firing pin, cross-bolt safety, and spring-loaded cammed locking lever. The supplied information also describes compatibility with standard Bond Arms barrels.

Important specification note: The supplied product information contains conflicting chambering information. The primary barrel’s exact cartridge should be verified before publication. Package 2 is specifically described as including a second .357 Magnum/.38 Special Cerakoted barrel and a Bond Arms black leather driving holster.