Description

Bond Arms Protect the 2nd Amendment .45 Colt 4.25-Inch Stainless Break Action

The Bond Arms Protect the 2nd Amendment is a compact double-barrel break-action handgun configured with a 4.25-inch barrel and chambered for .45 Colt. This configuration features an engraved stainless finish, engraved rosewood grips, and an overall length of 6.25 inches.

The 4.25-inch barrel is longer than the shorter configurations in the Bond Arms lineup. The supplied product information describes the longer barrel as providing tighter shot patterns, higher velocities, and more manageable recoil compared with shorter barrels. The firearm also accepts standard compatible interchangeable Bond Arms barrels and incorporates extended grips intended to provide additional hand contact.

Bond Arms Protect the 2nd Amendment Key Features

• 4.25-inch barrel: The longer barrel configuration is designed around the supplied performance characteristics of tighter shot patterns, higher velocities, and more manageable recoil compared with shorter barrels.
• .45 Colt chambering: The supplied configuration is chambered for .45 Colt.
• Break-action design: Two-round double-barrel configuration using a break-open action.
• Engraved stainless finish: Stainless construction with an engraved finish.
• Engraved rosewood grips: Extended engraved rosewood grips are specified for this model.
• Interchangeable barrel compatibility: Designed to accept standard compatible Bond Arms interchangeable barrels.
• Blade front and fixed rear sights: Simple fixed sight configuration.
• 23.5-ounce weight: Listed weight for this configuration.
• 6.25-inch overall length: Compact overall dimensions despite the extended barrel.
• Right-hand configuration: The supplied specifications identify the model as right hand.

Technical Specifications

Specification	Details
Action	Break Action
Capacity	2 Rounds
Barrel Length	4.25 inches
Finish	Engraved Stainless
Grips	Engraved Rosewood
Sights	Blade Front / Fixed Rear
Weight	23.5 oz
Cartridge	.45 Colt
Gun Model	PT2A
Hand	Right
Overall Length	6.25 inches
Type	Centerfire
State Compliance	Colorado Compliant / New York Compliant / Washington Compliant

4.25-Inch Barrel Configuration

The Protect the 2nd Amendment uses a 4.25-inch barrel, giving this configuration a longer barrel profile than many compact Bond Arms models. According to the supplied product information, the additional barrel length is intended to provide tighter shot patterns, higher velocities, and more manageable recoil compared with shorter barrel configurations.

The listed overall length is 6.25 inches, while the listed weight is 23.5 ounces. These dimensions provide the defining physical characteristics of this particular PT2A configuration.

.45 Colt Chambering

This configuration is chambered for .45 Colt, a centerfire cartridge. The firearm’s chamber markings and manufacturer’s specifications should always be checked before selecting ammunition.

Only ammunition specifically appropriate for the firearm’s marked chambering should be used. Ammunition selection, loading, and handling should follow the manufacturer’s instructions and established firearm safety practices.

Break-Action Double-Barrel Design

The Protect the 2nd Amendment uses a break-action design with a two-round capacity. The break-action configuration allows the barrel assembly to open for loading, unloading, and inspection according to the manufacturer’s operating instructions.

As with any firearm, the action should be handled with the muzzle pointed in a safe direction, with the firearm treated as loaded until its condition has been personally verified.

Engraved Stainless Construction

The PT2A specification identifies an engraved stainless finish. The stainless construction gives the firearm its specified metal finish, while the engraving provides the distinctive appearance associated with this configuration.

The supplied specifications also identify engraved rosewood grips. These extended grips provide additional grip surface compared with shorter grip configurations and are part of the overall design of this model.

Interchangeable Barrel Compatibility

The Protect the 2nd Amendment is designed to accept standard compatible Bond Arms interchangeable barrels. This allows the Bond Arms platform to accommodate compatible barrel configurations while retaining the same basic frame architecture.

Barrel compatibility should always be confirmed for the specific firearm and replacement barrel. Installation and removal should be performed according to the manufacturer’s instructions, and any component used should be specifically identified as compatible with the firearm.

Sights and Handling Features

The PT2A uses a blade front sight and fixed rear sight. This fixed sight arrangement provides a straightforward sighting configuration without an adjustable rear sight.

The supplied model information identifies this configuration as right hand. Its 6.25-inch overall length and 23.5-ounce weight complete the physical specifications provided for the model.

Safety and Responsible Handling

• Always treat every firearm as if it is loaded.
• Keep the muzzle pointed in a safe direction.
• Keep your finger outside the trigger guard until you are ready to fire.
• Use only ammunition that matches the firearm’s marked chambering.
• Keep the firearm unloaded when it is not in use.
• Read and follow the manufacturer’s owner’s manual before operating or maintaining the firearm.
• Verify that replacement barrels and components are specifically compatible with the firearm.
• Store the firearm securely and prevent unauthorized access.
• Follow all applicable federal, state, and local firearm laws and regulations.

State Compliance Information

The supplied specifications list the PT2A configuration as Colorado Compliant, New York Compliant, and Washington Compliant. Firearm laws and compliance requirements can vary according to jurisdiction and may change over time.

This product information should not be considered legal advice or a guarantee of legal eligibility for a particular individual or location. Always verify current requirements with the appropriate federal, state, and local authorities before possession, transfer, transportation, or use.

Frequently Asked Questions

What caliber is the Bond Arms Protect the 2nd Amendment?

The supplied configuration is chambered for .45 Colt.

What is the barrel length?

The barrel length is listed as 4.25 inches.

What is the capacity?

The supplied specifications list a capacity of 2 rounds.

What type of action does the PT2A use?

The Protect the 2nd Amendment uses a break-action design.

Does the PT2A accept interchangeable barrels?

Yes. The supplied product information states that it accepts standard compatible Bond Arms interchangeable barrels. Specific barrel compatibility should be confirmed before installation.

What finish does the PT2A have?

The specifications identify the finish as engraved stainless.

What type of grips does it use?

The supplied specifications list engraved rosewood grips.

What are the sights?

The PT2A is specified with a blade front sight and fixed rear sight.

How much does the Protect the 2nd Amendment weigh?

The listed weight is 23.5 ounces.

Bond Arms Protect the 2nd Amendment Summary

The Bond Arms Protect the 2nd Amendment PT2A is a two-round break-action handgun chambered in .45 Colt and configured with a 4.25-inch barrel. It features an engraved stainless finish, engraved rosewood grips, blade front and fixed rear sights, and a listed weight of 23.5 ounces.

The longer 4.25-inch barrel is described in the supplied information as providing tighter shot patterns, higher velocities, and more manageable recoil compared with shorter barrels. The model also supports compatible Bond Arms interchangeable barrels and has a listed overall length of 6.25 inches.