Description

Bond Arms Snake Slayer IV .38 Special / .357 Magnum 4.25-Inch Stainless Steel Break Action

The Bond Arms Snake Slayer IV .38 Special is a two-round break-action handgun featuring a 4.25-inch stainless steel double barrel and frame. Compared with the standard Snake Slayer configuration, which is specified with a 3.5-inch barrel, the Snake Slayer IV uses a longer 4.25-inch barrel.

The supplied product information describes the longer barrel as providing tighter shot patterns, higher velocities, and more manageable recoil compared with the original Snake Slayer. This configuration is chambered for .38 Special / .357 Magnum and includes extended engraved rosewood grips, fixed sights, and compatibility with standard Bond Arms interchangeable barrels.

Bond Arms Snake Slayer IV Key Features

• 4.25-inch barrel: Longer than the 3.5-inch barrel specified for the standard Snake Slayer.
• .38 Special / .357 Magnum: The supplied specifications identify both cartridges for this configuration.
• Stainless steel construction: Stainless steel double barrel and frame.
• Break-action design: Two-round break-action configuration.
• Interchangeable barrel compatibility: Compatible with standard Bond Arms barrels.
• Automatic spent casing extractor: Included as part of the supplied feature set.
• Patented rebounding hammer: Rebounding hammer system specified for the model.
• Retracting firing pins: Mechanical feature listed by the manufacturer specifications supplied.
• Cross-bolt safety: Manual safety system incorporated into the configuration.
• Spring-loaded, cammed locking lever: Locking mechanism used with the break-action design.
• Extended engraved rosewood grips: Supplied grip configuration designed with an extended profile.
• Fixed sights: Front blade and fixed rear sight configuration.

Technical Specifications

Specification	Details
Action	Break Action
Capacity	2 Rounds
Barrel Length	4.25 inches
Finish	Stainless Steel
Grips	Extended Engraved Rosewood
Sights	Front Blade / Fixed Rear
Weight	23.5 oz
Cartridge	.38 Special / .357 Magnum
Gun Model	SNAKE SLAYER IV
Hand	Right
Overall Length	6.25 inches

4.25-Inch Barrel Configuration

The defining dimensional feature of the Snake Slayer IV is its 4.25-inch barrel. The supplied information specifically contrasts this with the 3.5-inch barrel of the standard Snake Slayer.

According to the provided product description, the additional barrel length is intended to provide tighter shot patterns, higher velocities, and more manageable recoil compared with the original Snake Slayer configuration. The listed overall length of the Snake Slayer IV is 6.25 inches, with a listed weight of 23.5 ounces.

.38 Special and .357 Magnum Chambering

The supplied specifications identify the Snake Slayer IV cartridge as .38 Special / .357 Magnum. These are the cartridge designations specified for this configuration.

Always verify the caliber markings on the individual firearm and consult the manufacturer’s documentation before selecting ammunition. Only ammunition specifically appropriate for the firearm’s marked chambering should be used.

Stainless Steel Double-Barrel and Frame

The Snake Slayer IV uses a stainless steel double barrel and frame. The stainless steel construction is listed as the finish in the supplied specifications and forms the primary exterior configuration of the firearm.

The two-barrel arrangement is integrated into the break-action design, with the firearm listed at a two-round capacity.

Interchangeable Bond Arms Barrel Compatibility

The Snake Slayer IV is specified as compatible with standard Bond Arms interchangeable barrels. This feature allows the Bond Arms platform to accommodate compatible barrel configurations while retaining the same basic frame.

Compatibility should always be confirmed for the specific firearm and barrel combination. Installation, removal, and inspection of interchangeable components should follow the manufacturer’s instructions.

Extended Engraved Rosewood Grips

The supplied configuration includes extended engraved rosewood grips. The extended grip design provides additional grip surface compared with shorter configurations, while the engraved rosewood construction gives the model its specified appearance.

The grip configuration is paired with a 4.25-inch barrel and 6.25-inch overall length, forming the physical dimensions listed for the Snake Slayer IV.

Extractor, Hammer and Firing Pins

The Snake Slayer IV includes an automatic spent casing extractor, which is part of the supplied feature set. The firearm also incorporates a patented rebounding hammer and retracting firing pins.

These mechanical features should be understood through the manufacturer’s owner’s manual before operating the firearm. Safe handling procedures remain necessary regardless of the mechanical safety features present.

Cross-Bolt Safety and Locking Mechanism

A cross-bolt safety is included in the supplied specifications. The break-action assembly also uses a spring-loaded, cammed locking lever as part of its locking mechanism.

Mechanical safety devices should never replace fundamental firearm safety practices. Always follow the manufacturer’s instructions for operating the safety and opening or closing the action.

Sights and Overall Dimensions

The Snake Slayer IV is equipped with a front blade and fixed rear sight. The fixed sight configuration provides a simple sighting arrangement without an adjustable rear sight.

The supplied specifications list a 6.25-inch overall length and a 23.5-ounce weight. The model is identified as a right-hand configuration.

Safety and Responsible Handling

• Always treat every firearm as if it is loaded.
• Keep the muzzle pointed in a safe direction.
• Keep your finger outside the trigger guard until you are ready to fire.
• Use only ammunition that matches the firearm’s marked chambering.
• Follow the manufacturer’s instructions when operating the break-action mechanism.
• Keep the firearm unloaded when it is not being used.
• Read the manufacturer’s owner’s manual before operating, maintaining, or modifying the firearm.
• Use only compatible barrels and components approved for the specific firearm.
• Store the firearm securely and prevent unauthorized access.
• Follow all applicable federal, state, and local firearm laws and regulations.

Frequently Asked Questions

What caliber is the Bond Arms Snake Slayer IV?

The supplied specifications identify the chambering as .38 Special / .357 Magnum.

What is the barrel length?

The Snake Slayer IV has a listed 4.25-inch barrel.

How does the Snake Slayer IV barrel compare with the standard Snake Slayer?

The supplied information identifies the Snake Slayer IV with a 4.25-inch barrel compared with a 3.5-inch barrel on the standard Snake Slayer. The product description states that the longer barrel provides tighter shot patterns, higher velocities, and more manageable recoil compared with the original configuration.

What is the capacity?

The listed capacity is 2 rounds.

Does the Snake Slayer IV accept interchangeable barrels?

Yes. The supplied product information states that it is compatible with standard Bond Arms interchangeable barrels. Specific compatibility should be confirmed before installing another barrel.

What type of action does the Snake Slayer IV use?

The firearm uses a break-action design.

What type of grips does it have?

The supplied specifications list extended engraved rosewood grips.

What sights does it use?

The Snake Slayer IV uses a front blade and fixed rear sight.

How much does it weigh?

The supplied specification lists the weight at 23.5 ounces.

Bond Arms Snake Slayer IV Summary

The Bond Arms Snake Slayer IV is a two-round break-action handgun chambered for .38 Special / .357 Magnum and configured with a 4.25-inch stainless steel barrel and frame. It has a listed overall length of 6.25 inches and a weight of 23.5 ounces.

The model includes extended engraved rosewood grips, front blade and fixed rear sights, an automatic spent casing extractor, rebounding hammer, retracting firing pins, cross-bolt safety, and spring-loaded cammed locking lever. It is also specified as compatible with standard Bond Arms interchangeable barrels.